linux-IllusionX/drivers/atm/uPD98401.h

293 lines
12 KiB
C
Raw Normal View History

/* drivers/atm/uPD98401.h - NEC uPD98401 (SAR) declarations */
/* Written 1995 by Werner Almesberger, EPFL LRC */
#ifndef DRIVERS_ATM_uPD98401_H
#define DRIVERS_ATM_uPD98401_H
#define MAX_CRAM_SIZE (1 << 18) /* 2^18 words */
#define RAM_INCREMENT 1024 /* check in 4 kB increments */
#define uPD98401_PORTS 0x24 /* probably more ? */
/*
* Commands
*/
#define uPD98401_OPEN_CHAN 0x20000000 /* open channel */
#define uPD98401_CHAN_ADDR 0x0003fff8 /* channel address */
#define uPD98401_CHAN_ADDR_SHIFT 3
#define uPD98401_CLOSE_CHAN 0x24000000 /* close channel */
#define uPD98401_CHAN_RT 0x02000000 /* RX/TX (0 TX, 1 RX) */
#define uPD98401_DEACT_CHAN 0x28000000 /* deactivate channel */
#define uPD98401_TX_READY 0x30000000 /* TX ready */
#define uPD98401_ADD_BAT 0x34000000 /* add batches */
#define uPD98401_POOL 0x000f0000 /* pool number */
#define uPD98401_POOL_SHIFT 16
#define uPD98401_POOL_NUMBAT 0x0000ffff /* number of batches */
#define uPD98401_NOP 0x3f000000 /* NOP */
#define uPD98401_IND_ACC 0x00000000 /* Indirect Access */
#define uPD98401_IA_RW 0x10000000 /* Read/Write (0 W, 1 R) */
#define uPD98401_IA_B3 0x08000000 /* Byte select, 1 enable */
#define uPD98401_IA_B2 0x04000000
#define uPD98401_IA_B1 0x02000000
#define uPD98401_IA_B0 0x01000000
#define uPD98401_IA_BALL 0x0f000000 /* whole longword */
#define uPD98401_IA_TGT 0x000c0000 /* Target */
#define uPD98401_IA_TGT_SHIFT 18
#define uPD98401_IA_TGT_CM 0 /* - Control Memory */
#define uPD98401_IA_TGT_SAR 1 /* - uPD98401 registers */
#define uPD98401_IA_TGT_PHY 3 /* - PHY device */
#define uPD98401_IA_ADDR 0x0003ffff
/*
* Command Register Status
*/
#define uPD98401_BUSY 0x80000000 /* SAR is busy */
#define uPD98401_LOCKED 0x40000000 /* SAR is locked by other CPU */
/*
* Indications
*/
/* Normal (AAL5) Receive Indication */
#define uPD98401_AAL5_UINFO 0xffff0000 /* user-supplied information */
#define uPD98401_AAL5_UINFO_SHIFT 16
#define uPD98401_AAL5_SIZE 0x0000ffff /* PDU size (in _CELLS_ !!) */
#define uPD98401_AAL5_CHAN 0x7fff0000 /* Channel number */
#define uPD98401_AAL5_CHAN_SHIFT 16
#define uPD98401_AAL5_ERR 0x00008000 /* Error indication */
#define uPD98401_AAL5_CI 0x00004000 /* Congestion Indication */
#define uPD98401_AAL5_CLP 0x00002000 /* CLP (>= 1 cell had CLP=1) */
#define uPD98401_AAL5_ES 0x00000f00 /* Error Status */
#define uPD98401_AAL5_ES_SHIFT 8
#define uPD98401_AAL5_ES_NONE 0 /* No error */
#define uPD98401_AAL5_ES_FREE 1 /* Receiver free buf underflow */
#define uPD98401_AAL5_ES_FIFO 2 /* Receiver FIFO overrun */
#define uPD98401_AAL5_ES_TOOBIG 3 /* Maximum length violation */
#define uPD98401_AAL5_ES_CRC 4 /* CRC error */
#define uPD98401_AAL5_ES_ABORT 5 /* User abort */
#define uPD98401_AAL5_ES_LENGTH 6 /* Length violation */
#define uPD98401_AAL5_ES_T1 7 /* T1 error (timeout) */
#define uPD98401_AAL5_ES_DEACT 8 /* Deactivated with DEACT_CHAN */
#define uPD98401_AAL5_POOL 0x0000001f /* Free buffer pool number */
/* Raw Cell Indication */
#define uPD98401_RAW_UINFO uPD98401_AAL5_UINFO
#define uPD98401_RAW_UINFO_SHIFT uPD98401_AAL5_UINFO_SHIFT
#define uPD98401_RAW_HEC 0x000000ff /* HEC */
#define uPD98401_RAW_CHAN uPD98401_AAL5_CHAN
#define uPD98401_RAW_CHAN_SHIFT uPD98401_AAL5_CHAN_SHIFT
/* Transmit Indication */
#define uPD98401_TXI_CONN 0x7fff0000 /* Connection Number */
#define uPD98401_TXI_CONN_SHIFT 16
#define uPD98401_TXI_ACTIVE 0x00008000 /* Channel remains active */
#define uPD98401_TXI_PQP 0x00007fff /* Packet Queue Pointer */
/*
* Directly Addressable Registers
*/
#define uPD98401_GMR 0x00 /* General Mode Register */
#define uPD98401_GSR 0x01 /* General Status Register */
#define uPD98401_IMR 0x02 /* Interrupt Mask Register */
#define uPD98401_RQU 0x03 /* Receive Queue Underrun */
#define uPD98401_RQA 0x04 /* Receive Queue Alert */
#define uPD98401_ADDR 0x05 /* Last Burst Address */
#define uPD98401_VER 0x06 /* Version Number */
#define uPD98401_SWR 0x07 /* Software Reset */
#define uPD98401_CMR 0x08 /* Command Register */
#define uPD98401_CMR_L 0x09 /* Command Register and Lock/Unlock */
#define uPD98401_CER 0x0a /* Command Extension Register */
#define uPD98401_CER_L 0x0b /* Command Ext Reg and Lock/Unlock */
#define uPD98401_MSH(n) (0x10+(n)) /* Mailbox n Start Address High */
#define uPD98401_MSL(n) (0x14+(n)) /* Mailbox n Start Address High */
#define uPD98401_MBA(n) (0x18+(n)) /* Mailbox n Bottom Address */
#define uPD98401_MTA(n) (0x1c+(n)) /* Mailbox n Tail Address */
#define uPD98401_MWA(n) (0x20+(n)) /* Mailbox n Write Address */
/* GMR is at 0x00 */
#define uPD98401_GMR_ONE 0x80000000 /* Must be set to one */
#define uPD98401_GMR_SLM 0x40000000 /* Address mode (0 word, 1 byte) */
#define uPD98401_GMR_CPE 0x00008000 /* Control Memory Parity Enable */
#define uPD98401_GMR_LP 0x00004000 /* Loopback */
#define uPD98401_GMR_WA 0x00002000 /* Early Bus Write Abort/RDY */
#define uPD98401_GMR_RA 0x00001000 /* Early Read Abort/RDY */
#define uPD98401_GMR_SZ 0x00000f00 /* Burst Size Enable */
#define uPD98401_BURST16 0x00000800 /* 16-word burst */
#define uPD98401_BURST8 0x00000400 /* 8-word burst */
#define uPD98401_BURST4 0x00000200 /* 4-word burst */
#define uPD98401_BURST2 0x00000100 /* 2-word burst */
#define uPD98401_GMR_AD 0x00000080 /* Address (burst resolution) Disable */
#define uPD98401_GMR_BO 0x00000040 /* Byte Order (0 little, 1 big) */
#define uPD98401_GMR_PM 0x00000020 /* Bus Parity Mode (0 byte, 1 word)*/
#define uPD98401_GMR_PC 0x00000010 /* Bus Parity Control (0even,1odd) */
#define uPD98401_GMR_BPE 0x00000008 /* Bus Parity Enable */
#define uPD98401_GMR_DR 0x00000004 /* Receive Drop Mode (0drop,1don't)*/
#define uPD98401_GMR_SE 0x00000002 /* Shapers Enable */
#define uPD98401_GMR_RE 0x00000001 /* Receiver Enable */
/* GSR is at 0x01, IMR is at 0x02 */
#define uPD98401_INT_PI 0x80000000 /* PHY interrupt */
#define uPD98401_INT_RQA 0x40000000 /* Receive Queue Alert */
#define uPD98401_INT_RQU 0x20000000 /* Receive Queue Underrun */
#define uPD98401_INT_RD 0x10000000 /* Receiver Deactivated */
#define uPD98401_INT_SPE 0x08000000 /* System Parity Error */
#define uPD98401_INT_CPE 0x04000000 /* Control Memory Parity Error */
#define uPD98401_INT_SBE 0x02000000 /* System Bus Error */
#define uPD98401_INT_IND 0x01000000 /* Initialization Done */
#define uPD98401_INT_RCR 0x0000ff00 /* Raw Cell Received */
#define uPD98401_INT_RCR_SHIFT 8
#define uPD98401_INT_MF 0x000000f0 /* Mailbox Full */
#define uPD98401_INT_MF_SHIFT 4
#define uPD98401_INT_MM 0x0000000f /* Mailbox Modified */
/* VER is at 0x06 */
#define uPD98401_MAJOR 0x0000ff00 /* Major revision */
#define uPD98401_MAJOR_SHIFT 8
#define uPD98401_MINOR 0x000000ff /* Minor revision */
/*
* Indirectly Addressable Registers
*/
#define uPD98401_IM(n) (0x40000+(n)) /* Scheduler n I and M */
#define uPD98401_X(n) (0x40010+(n)) /* Scheduler n X */
#define uPD98401_Y(n) (0x40020+(n)) /* Scheduler n Y */
#define uPD98401_PC(n) (0x40030+(n)) /* Scheduler n P, C, p and c */
#define uPD98401_PS(n) (0x40040+(n)) /* Scheduler n priority and status */
/* IM contents */
#define uPD98401_IM_I 0xff000000 /* I */
#define uPD98401_IM_I_SHIFT 24
#define uPD98401_IM_M 0x00ffffff /* M */
/* PC contents */
#define uPD98401_PC_P 0xff000000 /* P */
#define uPD98401_PC_P_SHIFT 24
#define uPD98401_PC_C 0x00ff0000 /* C */
#define uPD98401_PC_C_SHIFT 16
#define uPD98401_PC_p 0x0000ff00 /* p */
#define uPD98401_PC_p_SHIFT 8
#define uPD98401_PC_c 0x000000ff /* c */
/* PS contents */
#define uPD98401_PS_PRIO 0xf0 /* Priority level (0 high, 15 low) */
#define uPD98401_PS_PRIO_SHIFT 4
#define uPD98401_PS_S 0x08 /* Scan - must be 0 (internal) */
#define uPD98401_PS_R 0x04 /* Round Robin (internal) */
#define uPD98401_PS_A 0x02 /* Active (internal) */
#define uPD98401_PS_E 0x01 /* Enabled */
#define uPD98401_TOS 0x40100 /* Top of Stack Control Memory Address */
#define uPD98401_SMA 0x40200 /* Shapers Control Memory Start Address */
#define uPD98401_PMA 0x40201 /* Receive Pool Control Memory Start Address */
#define uPD98401_T1R 0x40300 /* T1 Register */
#define uPD98401_VRR 0x40301 /* VPI/VCI Reduction Register/Recv. Shutdown */
#define uPD98401_TSR 0x40302 /* Time-Stamp Register */
/* VRR is at 0x40301 */
#define uPD98401_VRR_SDM 0x80000000 /* Shutdown Mode */
#define uPD98401_VRR_SHIFT 0x000f0000 /* VPI/VCI Shift */
#define uPD98401_VRR_SHIFT_SHIFT 16
#define uPD98401_VRR_MASK 0x0000ffff /* VPI/VCI mask */
/*
* TX packet descriptor
*/
#define uPD98401_TXPD_SIZE 16 /* descriptor size (in bytes) */
#define uPD98401_TXPD_V 0x80000000 /* Valid bit */
#define uPD98401_TXPD_DP 0x40000000 /* Descriptor (1) or Pointer (0) */
#define uPD98401_TXPD_SM 0x20000000 /* Single (1) or Multiple (0) */
#define uPD98401_TXPD_CLPM 0x18000000 /* CLP mode */
#define uPD98401_CLPM_0 0 /* 00 CLP = 0 */
#define uPD98401_CLPM_1 3 /* 11 CLP = 1 */
#define uPD98401_CLPM_LAST 1 /* 01 CLP unless last cell */
#define uPD98401_TXPD_CLPM_SHIFT 27
#define uPD98401_TXPD_PTI 0x07000000 /* PTI pattern */
#define uPD98401_TXPD_PTI_SHIFT 24
#define uPD98401_TXPD_GFC 0x00f00000 /* GFC pattern */
#define uPD98401_TXPD_GFC_SHIFT 20
#define uPD98401_TXPD_C10 0x00040000 /* insert CRC-10 */
#define uPD98401_TXPD_AAL5 0x00020000 /* AAL5 processing */
#define uPD98401_TXPD_MB 0x00010000 /* TX mailbox number */
#define uPD98401_TXPD_UU 0x0000ff00 /* CPCS-UU */
#define uPD98401_TXPD_UU_SHIFT 8
#define uPD98401_TXPD_CPI 0x000000ff /* CPI */
/*
* TX buffer descriptor
*/
#define uPD98401_TXBD_SIZE 8 /* descriptor size (in bytes) */
#define uPD98401_TXBD_LAST 0x80000000 /* last buffer in packet */
/*
* TX VC table
*/
/* 1st word has the same structure as in a TX packet descriptor */
#define uPD98401_TXVC_L 0x80000000 /* last buffer */
#define uPD98401_TXVC_SHP 0x0f000000 /* shaper number */
#define uPD98401_TXVC_SHP_SHIFT 24
#define uPD98401_TXVC_VPI 0x00ff0000 /* VPI */
#define uPD98401_TXVC_VPI_SHIFT 16
#define uPD98401_TXVC_VCI 0x0000ffff /* VCI */
#define uPD98401_TXVC_QRP 6 /* Queue Read Pointer is in word 6 */
/*
* RX free buffer pools descriptor
*/
#define uPD98401_RXFP_ALERT 0x70000000 /* low water mark */
#define uPD98401_RXFP_ALERT_SHIFT 28
#define uPD98401_RXFP_BFSZ 0x0f000000 /* buffer size, 64*2^n */
#define uPD98401_RXFP_BFSZ_SHIFT 24
#define uPD98401_RXFP_BTSZ 0x00ff0000 /* batch size, n+1 */
#define uPD98401_RXFP_BTSZ_SHIFT 16
#define uPD98401_RXFP_REMAIN 0x0000ffff /* remaining batches in pool */
/*
* RX VC table
*/
#define uPD98401_RXVC_BTSZ 0xff000000 /* remaining free buffers in batch */
#define uPD98401_RXVC_BTSZ_SHIFT 24
#define uPD98401_RXVC_MB 0x00200000 /* RX mailbox number */
#define uPD98401_RXVC_POOL 0x001f0000 /* free buffer pool number */
#define uPD98401_RXVC_POOL_SHIFT 16
#define uPD98401_RXVC_UINFO 0x0000ffff /* user-supplied information */
#define uPD98401_RXVC_T1 0xffff0000 /* T1 timestamp */
#define uPD98401_RXVC_T1_SHIFT 16
#define uPD98401_RXVC_PR 0x00008000 /* Packet Reception, 1 if busy */
#define uPD98401_RXVC_DR 0x00004000 /* FIFO Drop */
#define uPD98401_RXVC_OD 0x00001000 /* Drop OAM cells */
#define uPD98401_RXVC_AR 0x00000800 /* AAL5 or raw cell; 1 if AAL5 */
#define uPD98401_RXVC_MAXSEG 0x000007ff /* max number of segments per PDU */
#define uPD98401_RXVC_REM 0xfffe0000 /* remaining words in curr buffer */
#define uPD98401_RXVC_REM_SHIFT 17
#define uPD98401_RXVC_CLP 0x00010000 /* CLP received */
#define uPD98401_RXVC_BFA 0x00008000 /* Buffer Assigned */
#define uPD98401_RXVC_BTA 0x00004000 /* Batch Assigned */
#define uPD98401_RXVC_CI 0x00002000 /* Congestion Indication */
#define uPD98401_RXVC_DD 0x00001000 /* Dropping incoming cells */
#define uPD98401_RXVC_DP 0x00000800 /* like PR ? */
#define uPD98401_RXVC_CURSEG 0x000007ff /* Current Segment count */
/*
* RX lookup table
*/
#define uPD98401_RXLT_ENBL 0x8000 /* Enable */
#endif