Blaster4385/device_google_lynx
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
device_google_lynx/device-lynx.mk
timothywang 5460d349fc Update 1080p 60fps binning mode settings 
Keep rear main camera as full video mode.

Bug: 234324271
Test: GCA
Change-Id: I233dd7e7f3a0c0708784b996f5e16817a3fb2a57
2022-06-16 16:29:51 +08:00

205 lines
7.5 KiB
Makefile
Raw Blame History

#
# Copyright (C) 2021 The Android Open-Source Project
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#
TARGET_KERNEL_DIR ?= device/google/lynx-kernel
TARGET_BOARD_KERNEL_HEADERS := device/google/lynx-kernel/kernel-headers
$(call inherit-product-if-exists, vendor/google_devices/lynx/prebuilts/device-vendor-lynx.mk)
$(call inherit-product-if-exists, vendor/google_devices/gs201/prebuilts/device-vendor.mk)
$(call inherit-product-if-exists, vendor/google_devices/gs201/proprietary/device-vendor.mk)
$(call inherit-product-if-exists, vendor/google_devices/lynx/proprietary/lynx/device-vendor-lynx.mk)
DEVICE_PACKAGE_OVERLAYS += device/google/lynx/lynx/overlay
include device/google/lynx/audio/lynx/audio-tables.mk
include device/google/gs201/device-shipping-common.mk
include hardware/google/pixel/vibrator/cs40l26/device.mk
$(call soong_config_set,lyric,tuning_product,cloudripper)
$(call soong_config_set,google3a_config,target_device,cloudripper)
# Init files
PRODUCT_COPY_FILES += \
device/google/lynx/conf/init.lynx.rc:$(TARGET_COPY_OUT_VENDOR)/etc/init/hw/init.lynx.rc
# Recovery files
PRODUCT_COPY_FILES += \
device/google/lynx/conf/init.recovery.device.rc:$(TARGET_COPY_OUT_RECOVERY)/root/init.recovery.lynx.rc
# insmod files
PRODUCT_COPY_FILES += \
device/google/lynx/init.insmod.lynx.cfg:$(TARGET_COPY_OUT_VENDOR)/etc/init.insmod.lynx.cfg
# Camera
PRODUCT_COPY_FILES += \
device/google/lynx/media_profiles_lynx.xml:$(TARGET_COPY_OUT_VENDOR)/etc/media_profiles_V1_0.xml
# Display Config
PRODUCT_COPY_FILES += \
device/google/lynx/lynx/display_colordata_dev_cal0.pb:$(TARGET_COPY_OUT_VENDOR)/etc/display_colordata_dev_cal0.pb
# NFC
PRODUCT_COPY_FILES += \
frameworks/native/data/etc/android.hardware.nfc.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.nfc.xml \
frameworks/native/data/etc/android.hardware.nfc.hce.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.nfc.hce.xml \
frameworks/native/data/etc/android.hardware.nfc.hcef.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.nfc.hcef.xml \
frameworks/native/data/etc/com.nxp.mifare.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/com.nxp.mifare.xml \
frameworks/native/data/etc/android.hardware.nfc.uicc.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.nfc.uicc.xml \
frameworks/native/data/etc/android.hardware.nfc.ese.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.nfc.ese.xml \
device/google/lynx/nfc/libnfc-hal-st.conf:$(TARGET_COPY_OUT_VENDOR)/etc/libnfc-hal-st.conf \
device/google/lynx/nfc/libnfc-nci-lynx.conf:$(TARGET_COPY_OUT_PRODUCT)/etc/libnfc-nci.conf
PRODUCT_PACKAGES += \
NfcNci \
Tag \
android.hardware.nfc-service.st
# SecureElement
PRODUCT_PACKAGES += \
android.hardware.secure_element@1.2-service-gto \
android.hardware.secure_element@1.2-service-gto-ese2
PRODUCT_COPY_FILES += \
frameworks/native/data/etc/android.hardware.se.omapi.ese.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.se.omapi.ese.xml \
frameworks/native/data/etc/android.hardware.se.omapi.uicc.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.se.omapi.uicc.xml \
device/google/lynx/nfc/libse-gto-hal.conf:$(TARGET_COPY_OUT_VENDOR)/etc/libse-gto-hal.conf \
device/google/lynx/nfc/libse-gto-hal2.conf:$(TARGET_COPY_OUT_VENDOR)/etc/libse-gto-hal2.conf
DEVICE_MANIFEST_FILE += \
device/google/lynx/nfc/manifest_se.xml
# Thermal Config
PRODUCT_COPY_FILES += \
device/google/lynx/thermal_info_config_lynx.json:$(TARGET_COPY_OUT_VENDOR)/etc/thermal_info_config.json
# Power HAL config
PRODUCT_COPY_FILES += \
device/google/lynx/powerhint.json:$(TARGET_COPY_OUT_VENDOR)/etc/powerhint.json
# PowerStats HAL
PRODUCT_SOONG_NAMESPACES += device/google/lynx/powerstats
# Bluetooth HAL and Pixel extension
include device/google/lynx/bluetooth/qti_default.mk
# Keymaster HAL
#LOCAL_KEYMASTER_PRODUCT_PACKAGE ?= android.hardware.keymaster@4.1-service
# Gatekeeper HAL
#LOCAL_GATEKEEPER_PRODUCT_PACKAGE ?= android.hardware.gatekeeper@1.0-service.software
# Gatekeeper
# PRODUCT_PACKAGES += \
# android.hardware.gatekeeper@1.0-service.software
# Keymint replaces Keymaster
# PRODUCT_PACKAGES += \
# android.hardware.security.keymint-service
# Keymaster
#PRODUCT_PACKAGES += \
# android.hardware.keymaster@4.0-impl \
# android.hardware.keymaster@4.0-service
#PRODUCT_PACKAGES += android.hardware.keymaster@4.0-service.remote
#PRODUCT_PACKAGES += android.hardware.keymaster@4.1-service.remote
#LOCAL_KEYMASTER_PRODUCT_PACKAGE := android.hardware.keymaster@4.1-service
#LOCAL_KEYMASTER_PRODUCT_PACKAGE ?= android.hardware.keymaster@4.1-service
# PRODUCT_PROPERTY_OVERRIDES += \
# ro.hardware.keystore_desede=true \
# ro.hardware.keystore=software \
# ro.hardware.gatekeeper=software
# Fingerprint HAL
GOODIX_CONFIG_BUILD_VERSION := g7_trusty
include device/google/gs101/fingerprint/udfps_common.mk
ifeq ($(filter factory%, $(TARGET_PRODUCT)),)
include device/google/gs101/fingerprint/udfps_shipping.mk
else
include device/google/gs101/fingerprint/udfps_factory.mk
endif
# Vibrator HAL
PRODUCT_VENDOR_PROPERTIES += \
ro.vendor.vibrator.hal.supported_primitives=243
# Trusty liboemcrypto.so
PRODUCT_SOONG_NAMESPACES += vendor/google_devices/lynx/prebuilts
# GPS xml
ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT)))
PRODUCT_COPY_FILES += \
device/google/lynx/gps.xml.l10:$(TARGET_COPY_OUT_VENDOR)/etc/gnss/gps.xml
else
PRODUCT_COPY_FILES += \
device/google/lynx/gps_user.xml.l10:$(TARGET_COPY_OUT_VENDOR)/etc/gnss/gps.xml
endif
# DCK properties based on target
PRODUCT_PROPERTY_OVERRIDES += \
ro.gms.dck.eligible_wcc=2
# WIFI COEX
PRODUCT_COPY_FILES += \
device/google/lynx/wifi/coex_table.xml:$(TARGET_COPY_OUT_VENDOR)/etc/wifi/coex_table.xml
# WiFi Overlay
PRODUCT_PACKAGES += \
WifiOverlay2023Mid
# Wifi Aware Interface
PRODUCT_PROPERTY_OVERRIDES += \
wifi.aware.interface=wifi-aware0
# Set zram size
PRODUCT_VENDOR_PROPERTIES += \
vendor.zram.size=3g
# Set support hide display cutout feature
PRODUCT_PRODUCT_PROPERTIES += \
ro.support_hide_display_cutout=true
# Hide cutout overlays
PRODUCT_PACKAGES += \
NoCutoutOverlay \
AvoidAppsInCutoutOverlay
# Camera
PRODUCT_PROPERTY_OVERRIDES += \
persist.vendor.camera.extended_launch_boost=1 \
persist.vendor.camera.raise_buf_allocation_priority=1
# Enable camera 1080P 60FPS binning mode
PRODUCT_VENDOR_PROPERTIES += \
persist.vendor.camera.1080P_60fps_binning=true
# Limit camera 1080P 60FPS binning mode to not rear main camera
PRODUCT_VENDOR_PROPERTIES += \
persist.vendor.camera.1080P_60fps_binning_except_rear_main=true
# Bluetooth LE Audio
PRODUCT_PRODUCT_PROPERTIES += \
ro.bluetooth.leaudio_switcher.supported=true \
bluetooth.profile.bap.broadcast.source.enabled=true \
bluetooth.profile.bap.broadcast.assist.enabled=true \
bluetooth.profile.bap.unicast.client.enabled=true \
bluetooth.profile.csip.set_coordinator.enabled=true \
bluetooth.profile.hap.client.enabled=true \
bluetooth.profile.mcp.server.enabled=true \
bluetooth.profile.ccp.server.enabled=true \
bluetooth.profile.vcp.controller.enabled=true
Reference in a new issue View git blame Copy permalink