extend this to prevent alsa trigger stop playback
and causing pop
Bug: 238056484
Signed-off-by: vincenttew <vincenttew@google.com>
Change-Id: If9866a5755178a7c76b22dcbd75b9b9e1dc87620
Change List :
Fortemedia:
Handset :
Optimal performance for Generic/TMOUS Handset NB/WB/SWB (TMO tuning / AMS tuning)
Sync TX setting to HAC / TMO-HAC / HAC Reserve 2 SWB
Files from the latest attachment on b/246260083
Bug: 246260083
Test: verified by hardware engineers
Change-id: I8ea1537737620b8b2de9921b804c16abc226c027
Change List :
Fortemedia:
Handset HAC:
Update EVT tuning for HAC mode T-coil signal testing FR failure
Handheld mode:
Sync Reserve 2 SWB setting to custom 1 (VoIP-EC-off) / custom 2 (VoIP-NR-off) / reserve 1 (VoIP-NREC-off) and disable NREC for related setting.
Files from the latest attachment on b/244539071
Bug: 244539071
Test: verified by hardware engineers
Change-id: I0b131b7e2afe69ff24bb30dfbf18812d4329d32e
1. change Re0 range from Typical+/- 15% to +/-10% for factory build
Files from the latest attachment on b/243387067
Bug: 243387067
Test: verified by hardware engineers
Change-id: Ife86a6093d6e87224f432cb9b89c8f0c593cfe37
I put L10 EVT tuning files in the attached file.
L10 EVT HW modify Proto speaker.
I need to re-tune mps file.
I base on EVT speaker make this mps file tuning.
And slightly lower volume step 21th to let volume curve smoothly.
So, I modify audio_policy.xml file.
Files from the latest attachment on b/242521368
Bug: 242153654
Bug: 242521368
Test: verified by hardware engineers
Change-id: Ide63f88ee7aa55f4b79c53de2d70314bc20ab285
Change list :
1. adjust IIR1 as main filter for flat FR in camcorder path.
2. for camcorder path, implement all 6 scenarios with same parameters except linear gain module, and use linear gain to swap channels.
3. fine tune and swap the channels in mic path.
Files from the latest attachment on b/241720915
Bug: 241498250
Bug: 241720915
Test: verified by hardware engineers
Change-id: Iea93f2d118c30bcd83c44c2227ce68a3bfa8074d
Change list:
1. Bot spekaer model for EVT version
Bug: 223513454
Test: manual
Signed-off-by: Yung Ti Su <andysu@google.com>
Change-Id: I9b0e79d296328e790b01e33f84d86aa18b572d8f
Change list
1. modify Rtrace in cali/diag.bin
Bug: 223513454
Test: manual
Signed-off-by: Yung Ti Su <andysu@google.com>
Change-Id: Ia6f0c6346b58f6e149a7fbe41f360d4ac92d99f9
Change list :
1. adjust IIR for flat FR in camcorder and mic path.
2. check in the latest parameters from C10/P10
Bug: 236802184
Test: manual
Signed-off-by: Yung Ti Su <andysu@google.com>
Change-Id: I1038eae584efa9209f6ba28d4783457e35aa7757
ag/18185767 corresponding to the change in mixer command
Bug: 235866657
Test: manual
Signed-off-by: Yung Ti Su <andysu@google.com>
Change-Id: I4417096aa337f07d5bd526c51db6b2da7d2068db
Change list:
L10 proto 1.1 tuning with 0520 FIR filter
Test: manual
Bug: 223513454
Signed-off-by: Yung Ti Su <andysu@google.com>
Change-Id: Iad5c01a9e2593abe764e9e996073783127b60a8a
Change list:
For waves_preset.mps
It increases top speaker excursion and reduce temperature to get better performance.
For audio_policy_volumes.xml
It changes volume curve to accompany with waves_preset.mps, which helps to get linear volume curve.
I also change DTMF, Ringtone, System sound volume curve to satisfy user expectation.
Bug: 234094724
Test: manual
Signed-off-by: Yung Ti Su <andysu@google.com>
Change-Id: I085089de96d366480c70da6d86e6d7983033a631
Change List :
- Handset
Optimal performance to meet 3GPP requirement for NB/WB/SWB
HAC: Modify DL FDEQ subband number for further tuning
- Handheld
Modify 3MIC solution to 2MIC solution
Bug: 230558942
Test: manual
Signed-off-by: Yung Ti Su <andysu@google.com>
Change-Id: Id84bf3f8bbe94c888201a65b28d6cd61f19fb00e
Due to BAACL not turned on as default
Test: manual
Bug: 232059631
Signed-off-by: Yung Ti Su <andysu@google.com>
Change-Id: I0414e20bf6e2d1ca24d5462e66a34a888cb40496
Change List :
sync P10 20220422 version
Bug: 230558942
Test: build pass
Signed-off-by: Yung Ti Su <andysu@google.com>
Change-Id: I15774cf0f5dc689a10c334025f3b120ebec62b85
Change list:
1. speaker model for proto stage
2. enable PICL function
Bug: 223513454
Test: build pass
Signed-off-by: Yung Ti Su <andysu@google.com>
Change-Id: Id5312b1932343c8f75fd9a9935cd9330c26d62ec
Change list:
1. Created a conservative speaker model for factory
2. Set an initial Re0 range for factory
3. Update firmware 29.65.0
Bug: 223513454
Test: build pass
Signed-off-by: Yung Ti Su <andysu@google.com>
Change-Id: Iaf9213915d6d2b3258c59d361ff999e1d0da3c09
Enable default 96k sample rate to fix the noise issue when enabling
96k speaker protection with 48k sample rate setting.
Bug: 206060532
Test: audio normal after device boot with speaker protection enabled
Change-Id: I6a62984c25497b38544a8463a86c30cae0a37098
Signed-off-by: Robert Lee <lerobert@google.com>
based on panther 0e0ae4dd4045e00dd50826d5c411351d47949d92
No-Typo-Check: based on above commit
Bug: 202250383
Change-Id: I7dbcba9fc0644cf8e547c59b14a544701adc484b
